Skip to main content

In-ground gutter drains are important in maintaining your home’s aesthetic appearance. Your landscaping is among the most valuable components of your home, and the last thing you want is to see it damaged by rainwater.

The benefits of installing in-ground gutter drains are numerous and significantly contribute to the wellness of your family members. With effective in-ground drains and gutter systems, all the water collected will be effectively drained away from your home.

What Is An “in Ground Gutter Drains?”

Homes in areas where they experience heavy rains have gutter downspouts that connect to in-ground drains. We refer to these drains as “in-ground, gutter drains”. The goal of the in-ground gutter drains is to redirect this water out of the house, typically towards the street or sidewalk. Sometimes, they connect straight to the underground sewer line.

If these in-ground gutter drains are blocked and blocked, water is unable to drain effectively out of into the drainage system. This causes water to spill over in different areas, eventually causing damage to the gutter system. Remember that your drain might be partially blocked and allow some water to pass through or be completely blocked and won’t allow water to pass through.


Problems with in-ground gutter drains

Clogged drains can damage a few typical things and may require costly repairs.

The most typical issue is that your gutters fall off quickly, and the gutter’s pitch may be affected. If the gutter is filled with water, it will become heavy. All the pressure pulls down the gutter off the wall and loosens its brackets.

If the drain has become blocked during winter, the stagnant water freezes into ice. Ice can ruin a gutter system if it’s unable to drain. You can see icicles hanging down from the gutters when this happens.

Another aspect of ice is that water expands once it freezes into a block of ice. Thus, if your in-ground gutter drain is brimming with water, it could break the pipe once it becomes ice and expands.

The blocked underground drain can open at any time, not only in winter. If they open up beneath the house, water will flow into your basement.


Signs That You’re In-Ground Gutter Drain Is Clogged


Gutters Overflowing


The extent of gutter overflow you notice from blocked in-ground drains tends to be quite extreme. If the clogged underground drain does not allow water to flow through, however, it still needs to move somewhere.

Once the downspout is filled with water, you can see water flowing out of the downspout adapter on the bottom, however, when the seal is tight, you might not see any water seeping out from the adapter at all. Besides, water will leak from other elbows or seams in the downspout.

When the downspout is completely full of water, the water will overflow. There will be water leaks from every gutter seam. Finally, when the gutter has filled up completely, the water will spill across the entire gutter’s top in huge sections, if not every inch of the gutter. If you notice an entire gutter overflowing, you should contact a professional for a full assessment.


Overflowing or water pooling from Downspout Connection

Downspouts connect to in-ground gutter drains using a variety of dimensions and shapes of adapters. They all serve the same purpose: to ensure a seamless transition from one pipe size to the next. They are designed to stop any water from spilling from the downspouts. (Keep in mind that, if your home does not have the right downspout connector, the water will leak out each time it rains, regardless of if the drain is blocked and/or not.)


To determine if you’ve got blocked, clogged in-ground gutter drains, the first place to examine is the bottoms of the downspouts in the home. If the in-ground gutter drains, it is common to notice the water pouring through the drainage pipe and overflowing from the adapter seams. It is only possible to observe this when it rains, so it is essential to check your downspouts whenever it’s raining.


Exit Point for Underground Drain

The majority of in-ground gutter drains leak onto the sidewalk, street or driveway. Sometimes, they drain into storm drains in your backyards and some drains join directly with the underground sewer network.

If the blocked-in-ground gutter drains run directly into the sewer, you won’t be able to determine the point at which the system drains because it’s underground. If, however, it drains out of a place you observe, you can examine the area during rain to determine whether the drain is running properly.


Check your in-ground gutter drains during heavy rains to ensure the water is flowing properly. If there isn’t much or no water flowing from one drain, but the heavy flow is coming from other drains, the drain in question is likely blocked underground.


You could also test the drains to check how much water drains out from the point of exit. You’ll need to unblock the downspout and the in-ground gutter drain at the adapter. After that, simply place the hose in the drain or put it towards the drain and then turn the water on. Then, walk to the drain’s outlet and see if the water is flowing as it should. If only a small amount of water is flowing through, then there is an issue.

in ground gutter drains

How to prevent in-ground Gutter Drains from becoming clogged

One way of keeping in-ground gutter drains free of clogging is to prevent any debris from going into the drains in the first place. If you are dealing with underground drains, it is recommended to install effective gutter protection.

Luckily for you, HomeCraft Gutter Protection specializes in high-quality gutter guards that prevent even the smallest debris from getting into your gutters. Besides, they provide a lifetime transferable warranty as an assurance that their products will serve you for a lifetime. Get a free estimate today to discuss your gutter issues with professional installers.

Here are a few of the most used methods to stop debris from getting into your downspouts and blocking drains that drain underground.

Downspout Strainer

Downspout strainers are a cost-effective solution to prevent debris from downspouts. They’re basically a wire ball which is placed on top of the downspouts. The issue with them is that debris can build up in this space and must be regularly cleaned. If it is not taken care of, this debris will cause water to overflow the gutters in this area. It may also redirect the water towards the gutter and cause it to harm the wood.

Downspout Filter Box

Downspout Filter Boxes are available in various designs, shapes and sizes; however, they all serve the same purpose. They stop debris from getting into the drain system. Downspout filter boxes are attached to the downspouts, making them easy to reach and remove debris.

Some people find them more suitable than strainers since you don’t need to climb over the roof to clean the debris. But they’re not 100% secure since your downspout can become blocked over the strainer. If this happens, you will need to remove the downspout (which isn’t too difficult). The filters stop the debris from entering and blocking the drainage system.

We wouldn’t recommend these downspout traps in line if you don’t have drains underground. The reason for this is that when the debris has reached the straight portion of the downspout, it’s already flowing out naturally. The majority of downspout clogs happen in the elbows, where the larger debris can be dragged away. After the debris is beyond the elbow, it’s at home. The downspout traps aren’t an answer to cleaning gutters in any way and should only be used to protect the in-ground gutter drains.


Gutter Covers/Leaf Guards

The most effective method for keeping debris from your gutter system is to install gutter covers on all gutters connected to in-ground gutter drains. This includes all gutters at the top that connect to lower levels of gutters. If the debris can enter any time, it could infiltrate the entire system.

There are various types of gutter covers, but they are not all as effective as one another. We recommend only using stainless steel gutter covers from HomeCraft Gutter Protection. If you choose to use less expensive gutter covers like gutter screens, lots of debris can still go into your gutter system and could obstruct your gutters and underground drains.

How to Fix Your Clogged Underground Drain System

The gutter downspouts of homeowners are connected to drains underground. The gutter drains are also known in the industry as “in-ground gutter drains “, and they are a common plumbing issue. The goal of gutter drains is to redirect water away from home, typically towards the sidewalk or street. They may also be connected directly to sewer lines beneath in some instances.

If the drains in these subsurface areas are blocked, the water that flows through the gutter system will be not able to drain properly. This causes the water to spill over in different locations, which can cause damage to your gutter system over the end. Remember that your drain may be partially blocked, which allows water to flow through, or completely blocked, which will stop any water from getting through.

Can Clog Gutters Cause Roof Damage?

The water can spill over into your gutter because of clogged subsurface drain systems that eventually ruin the fascia board. If the gutters are overflowing, then the burden of the debris may make the gutter fall out of the facia board, which could result in damages.

The gutter’s wood could deteriorate, causing major leaks because of excessive water flow and the burden of garbage damaging the fascia board. Termites, as well as other insects that thrive in moist, damp conditions, are attracted by wet wood.

Most Effective Ways to Unclog ground gutter drains

What do you do if there’s a blocked pipe, particularly if it’s located underground? There are a variety of methods to unclog gutter drains, including cable rodding, the hydro jetting blow bag as well as the milling picote. Each one of these methods has distinct advantages and disadvantages. Therefore it is important to talk with an expert plumber to decide the best method to use for your specific situation.

Cable Rodding

The process of cable rodding, known as Rodding, could be referred to by various other names, including the term “rooting,” snaking or augering. Whatever you decide to identify as the process involves pushing a wire across the pipe. The objective is to remove the blockage, so that water can flow through.

Blog Bag

A blow bag (also called a drain bladder) utilizes water pressure to clear drains. It looks like an inflatable balloon and is constructed from durable rubber. This blow bag is connected to a water source as well as the drainpipe is blocked. When it is filled with water, the blow bag lets out an intense flow of water down the pipe, which is expected to eliminate the obstruction. But, a blow bag is to be handled with caution as too much pressure can harm pipes, especially older pipes with weak joints.

Hydro Jetting

Hydro jetting is a modern technique for drain cleansing. It’s like power-washing the insides of pipes. A high-pressure hose is put into the drainage pipe. The strong stream of water is strong enough to wash away grease and solid waste but is safe for pipes.

Picote Milling

Picote Milling Machine: For obstructions that are extremely difficult to remove, such as tree roots that are growing too long or sediment build-up, the Picote machine follows the same approach to cable rodding; however it is equipped with special heads on the ends of the cable. This lets this Picture machine dislodge obstructions, remove obstructions, and offer wall-to-wall cleaning.

Professional drain cleaning is a must. As you can observe, the process of dealing with outdoor, hidden drain pipes like drainage lines and sewers could be difficult but not impossible. If you’re experiencing an unreliable drain or have become backed up, don’t allow the issue to get more serious.


Leave a Reply

Wait, Don't go!

Take the quiz to see what gutter guards cost on your home! It takes less than a minute.


Click to Hide Advanced Floating Content